Tweet
Originally posted by Kelly, post: 27035, member: 2323
-
,,,,,,,,,,,wow kelly your rail base stands are gonners too just like the ones on my boat -
Here is what West Marine / Port Supply has. I was not sure I was going to put that on mine.Originally posted by michael pingatore, post: 27039, member: 2342
Helmar Joe Johanesen
1959 Skagit 20ft Offshore, 1959 Skagit 16ft Skimaster,
1961 17ft Dorsett Catalina.1958 Uniflite 17 ft
Outboards: 2.5 Bearcats, 3 50hp White shadow Mercs
2 40hp Johnsons, several smaller Old kickers for a total of 12
Our Sister club
http://www.goldenstateglassics.com
Oh, and Where is Robin Hood when you need him??
Comment
-
Helmar I may go with those if nothing else turns up. Mike do you want one of mine to send off or are yours good enough to send one off?Comment
-
kelly the ones on my boat are all bad too mikepingatore in seattleOriginally posted by Kelly, post: 27044, member: 2323Comment
-
Originally posted by michael pingatore, post: 27047, member: 2342kelly are all the the stands the same in their angelOriginally posted by michael pingatore, post: 27047, member: 2342Comment
-
If one of these boats were to show up, around Arizona, the hardware might be usable. Anything I have seen around the PNW is shot due to the salt air it seems.Originally posted by michael pingatore, post: 27047, member: 2342
The one Bell Boy that Marty at Island Boat Shop got from Vegas had about the best on it I have ever seen.Helmar Joe Johanesen
1959 Skagit 20ft Offshore, 1959 Skagit 16ft Skimaster,
1961 17ft Dorsett Catalina.1958 Uniflite 17 ft
Outboards: 2.5 Bearcats, 3 50hp White shadow Mercs
2 40hp Johnsons, several smaller Old kickers for a total of 12
Our Sister club
http://www.goldenstateglassics.com
Oh, and Where is Robin Hood when you need him??
Comment
-
My rails are in sad shape as well. Not quite as bad, but in need of re-croming. For now, I'm not putting them on the deck. I may go with a modern set, Perko makes some that are OK, but I haven't decided.
All the rest of the deck hardware was rotten like those shots though. Judicious eBaying has netted me 6 stainless cleats and thanks to Mark D, a half way OK Kainer light. I also scored that spotlight in Poulsbo, but it is stainless as well, so it cleaned up.John Forsythe
'59 Bellboy 404 - Pretty Girl
Past Affairs:
'61 Marathon - Jammie DodgerComment
-
greetings sending my good rail mounts to a friend in mexico soon hes going to recast me copys for my 1960 uniflite also the pointed ends for the tube rail ends...he will s;so recast the uniflite badge for me for the rear stern sides mikepingatore in seattleOriginally posted by TheBronze, post: 27055, member: 339Comment
-
helmar helmar thanks for the pictures of the seats mine are going to be retro killers.......hope u checked out my retro back bench seat fram.....mikepingatore in seattleOriginally posted by Helmar, post: 27051, member: 59Comment
-
Any room still for those of us wanting some?Originally posted by michael pingatore, post: 27059, member: 2342Comment
-
greetings kelly..what do u need mikepingatore in seattleOriginally posted by Kelly, post: 27065, member: 2323Comment
-
Will he be doing chroming as well? My rails need chroming, not recasting.John Forsythe
'59 Bellboy 404 - Pretty Girl
Past Affairs:
'61 Marathon - Jammie DodgerComment
-
Originally posted by TheBronze, post: 27074, member: 339greetings my rail base mounts are pot metal and are brakening up thats why i am haveing them repoped in new metal then to the plater.mikepingatore in seattle..Originally posted by TheBronze, post: 27074, member: 339Comment
-
Mike, I need all the same stuff you do.Originally posted by Kelly, post: 26915, member: 2323Comment
-
greetings kelly ill see if he can cast the name badges for me mikepingatore in seattleOriginally posted by Kelly, post: 27089, member: 2323Comment
Comment