Tweet
I'm getting ready to pull the trigger on a Teleflex NFB SS132 rotary steering system (feedback welcome if you have one of these systems) and wanted to check with you guys on my measurements. I also want to see what others do for measurements.
The goal is to ensure I measured correctly, order the system, then finish out the thread with an pictorial install (I searched for a thread, but didn't see one).
Here are my measurements:
Center of the steering wheel (backside) out to the inner starboard wall = 21"
To the right of the steering wheel (backside), Starboard Helm to Stern = 87"
From the stern (splash well) out to where I think the outboard will connect = 29"
This puts me just about 11 1/2 feet. If I did all my measurements correctly, I'm thinking I should order a 12' system?
The goal is to ensure I measured correctly, order the system, then finish out the thread with an pictorial install (I searched for a thread, but didn't see one).
Here are my measurements:
Center of the steering wheel (backside) out to the inner starboard wall = 21"
To the right of the steering wheel (backside), Starboard Helm to Stern = 87"
From the stern (splash well) out to where I think the outboard will connect = 29"
This puts me just about 11 1/2 feet. If I did all my measurements correctly, I'm thinking I should order a 12' system?
Comment