Tweet
WOW NOW COMES THE JOB OF STRATEING OUT A MESS ON MY RUBRAIL,,,,,,iam going to take a couple 2x4 10ft long and put them together end to end then rouder out a 1/2 round ress down the center to lay the aluminun rub rail and start clampit at one end then tap it in to the ress to get it strate,,,,i found new T BOLTS ON LINE 1/4 20 1.5in long ,then when i install it ill use 3m 5200 sealer ,,,,start at the bow & work my way to the aft,,,,,,,what u guys thoughts ( see pictures)
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. If you have trouble registering, Please use "Contact Us" on this form below. Some new registrations do not make it though security due to so many spam botts. We welcome new members !!
- If you are a supporting member, please log in. Supporting members don't see advertisements. Everybody else does If you are seeing this and you think you shouldn't be, your subcription has probably expired. Please renew your subscription and this notice will go away.