Tweet
Done anyone have the Scott Guys email address or phone number?
Seems as I have a 45 Scott short shaft that will be needing some attention.
Seems as I have a 45 Scott short shaft that will be needing some attention.
-
Helmar Joe Johanesen
1959 Skagit 20ft Offshore, 1959 Skagit 16ft Skimaster,
1961 17ft Dorsett Catalina.1958 Uniflite 17 ft
Outboards: 2.5 Bearcats, 3 50hp White shadow Mercs
2 40hp Johnsons, several smaller Old kickers for a total of 12
Our Sister club
http://www.goldenstateglassics.com
Oh, and Where is Robin Hood when you need him??
-
Dick Johnson
1989 16ft Sylvan (Bought it New)
'57 Evinrude 18hp
'61 Johnson 5.5hp LS
'72 Johnson 6hp
'61 Homelite 55 Shortshaft
'65 Homelite 55
'68 Bearcat 55 (3)
'70 Bearcat 55 (1) -
Thanks Dick...Originally posted by Super Sportster, post: 7691
Hey, can you post the 85 Run up you have on youtube in the Homelite Bearcat section.
Its just as simple as Cut and Paste. Maybe a little detail how you were able to sweeten her up to make her reliable and what all you did to the Carbs?
That would be Major Cool.
Helmar Joe Johanesen
1959 Skagit 20ft Offshore, 1959 Skagit 16ft Skimaster,
1961 17ft Dorsett Catalina.1958 Uniflite 17 ft
Outboards: 2.5 Bearcats, 3 50hp White shadow Mercs
2 40hp Johnsons, several smaller Old kickers for a total of 12
Our Sister club
http://www.goldenstateglassics.com
Oh, and Where is Robin Hood when you need him??
Comment
-
I can do that, was kind of curious to see how the youtube video attachment works now.Originally posted by Helmar, post: 7702Thanks Dick...
Hey, can you post the 85 Run up you have on youtube in the Homelite Bearcat section.
Its just as simple as Cut and Paste. Maybe a little detail how you were able to sweeten her up to make her reliable and what all you did to the Carbs?
That would be Major Cool.Dick Johnson
1989 16ft Sylvan (Bought it New)
'57 Evinrude 18hp
'61 Johnson 5.5hp LS
'72 Johnson 6hp
'61 Homelite 55 Shortshaft
'65 Homelite 55
'68 Bearcat 55 (3)
'70 Bearcat 55 (1)Comment
-
Scott-McCulloch Outboards
....Just to add a little note to this section, I've got a couple of McCulloch 75's and I'm looking for a parts motor to back 'em up, if anybody runs across one of the old three-cylinder 75's, which at the time had the best horsepower-per-pound ratio of any outboard manufactured. Hope to try one of them out this winter, maybe during the New Year's Run.
- Martyhttp://www.pocketyachters.com
"If a man is to be obsessed by something, I suppose a boat is as good as anything, perhaps a bit better than most." - E. B. WhiteComment
-
Scottguy of Portland
I reringed one of those 75's about 25 yrs ago, it was a '66 Sears. My buddy who owned the engine found a guy on about 125th and Lincoln in SE Portland who had loads of parts for everything Scott-McCulloch. At the time there was very few parts that you couldn't get new from McCulloch he told us. They would back order them and when enough orders were made they would run a batch of parts to fill the orders which sometimes would take up to six months! Some parts were NLA and he would make them or have them made. I drove by there the other day and didn't see anything Scott related like many years ago. I wonder what happened to him and all the parts?Dick Johnson
1989 16ft Sylvan (Bought it New)
'57 Evinrude 18hp
'61 Johnson 5.5hp LS
'72 Johnson 6hp
'61 Homelite 55 Shortshaft
'65 Homelite 55
'68 Bearcat 55 (3)
'70 Bearcat 55 (1)Comment
Comment