Putting up a Costco Shelter so the powercat can be covered. Have 4x4s, 2x6s, and pier blocks as its foundation. I don't think it will blow away. Clint
Announcement
Collapse
No announcement yet.
Costco shelter
Collapse
X
-
Originally posted by strobee, post: 2091Putting up a Costco Shelter so the powercat can be covered. Have 4x4s, 2x6s, and pier blocks as its foundation. I don't think it will blow away. Clint
I still have up 5 of those suckers and had to replace one.
Now NONE of them move in even the nasty wind storms we can get coming up off the Hood Canal.
I just drilled some holes in some fence "T" posts (about half way up a 6 foot post) and drove them into the ground. Then used some fence wire to attach it to the tent legs (four corners only) and pounded it down even more as so the leg and foot was pinned down to the ground.
I have had them up three winters now..
Might be overkill would you sayHelmar Joe Johanesen
1959 Skagit 20ft Offshore, 1959 Skagit 16ft Skimaster,
1961 17ft Dorsett Catalina.1958 Uniflite 17 ft
Outboards: 2.5 Bearcats, 3 50hp White shadow Mercs
2 40hp Johnsons, several smaller Old kickers for a total of 12
Our Sister club
http://www.goldenstateglassics.com
Oh, and Where is Robin Hood when you need him??
Comment
-
I have 10 pier blocks with 4x4s bolted to them and then put 2x6s over the top of the 4x4. The 2x6s are different length then the 4x4s to add more to the ridgidness of the unit. I will put gravel around the pier blocks. I don't have near the wind that you have and all the trees keep the wind quieter. Hope a tree doesn't fall on anything. Clint
Comment
-
Good luck! I have (had) one that became airborne in spite of being tied down to two 4X8X20 peices of lumber mounted on concrete blocks. Fortunately the Dorsett survived...if anyone wants assorted posts and tent parts, they are welcome to them. ...just disassembled the %#)@&(! today!
Comment
-
Originally posted by RJY007, post: 2113Good luck! I have (had) one that became airborne in spite of being tied down to two 4X8X20 peices of lumber mounted on concrete blocks. Fortunately the Dorsett survived...if anyone wants assorted posts and tent parts, they are welcome to them. ...just disassembled the %#)@&(! today!
If still available I'm interested and can pick up tomorrow? 360 733 89411958 Skagit 20 Offshore hardtop cruiser "Kanigo"
Comment
-
Originally posted by strobee, post: 2109I have 10 pier blocks with 4x4s bolted to them and then put 2x6s over the top of the 4x4. The 2x6s are different length then the 4x4s to add more to the ridgidness of the unit. I will put gravel around the pier blocks. I don't have near the wind that you have and all the trees keep the wind quieter. Hope a tree doesn't fall on anything. Clint
Sounds like its not going to move at all.Helmar Joe Johanesen
1959 Skagit 20ft Offshore, 1959 Skagit 16ft Skimaster,
1961 17ft Dorsett Catalina.1958 Uniflite 17 ft
Outboards: 2.5 Bearcats, 3 50hp White shadow Mercs
2 40hp Johnsons, several smaller Old kickers for a total of 12
Our Sister club
http://www.goldenstateglassics.com
Oh, and Where is Robin Hood when you need him??
Comment
-
Mine has 2 crossed spikes at each of the eight feet And its cross tied inside to the boat trailer. My spot is pretty protected, but we have had some Big south winds that scared me but the shelter didn't budge. I do open the zippers about half way up in strong winds so it does not puff.
Comment
-
Those things wouldn't last out my way. We get wind most of the time at 20mph with gusts of 40mph and that is just the little winds. Sometime it blows 30mph to as high as 80. A few weeks ago the people behind us had a full size tramplin and the wind cought it and it came of their 6 foot fence and then over a 25 foot alley and over our 6 foot fence and landed in our yead.
MikeRed sails at night a sailors delight Red sails in the morn sailors be warned
Comment
-
shelter tip
I'm getting ready to put up a costco shelter that was gifted to me by Richard Young and thought I pass on a tip that Bham Rick told me about. His friend secured legs to lumber around the perimiter and then bolted 2x6 or 2x8's running from side to side where the trailer tires would rest and another where the trailer jack would be. In this manner to blow over it would have to take the boat as well and if that ever happen the shelter,boat would be the last thing I need to worry about.:eek:1958 Skagit 20 Offshore hardtop cruiser "Kanigo"
Comment
Comment